Keen K-1000 Floor Holding Oven (120V) - Maintains up to 1500 lbs of up to 18" electrodes at optimum temperature.

The holding ovens are larger and designed to hold electrodes at moderate optimum temperatures to assure dryness. All models are mercury free. The diagonal shelving is designed for maximum capacity and energy efficiency.

* Custom Shelving Available

Electrode Capacity: 1500 lbs. (680.4 kg) 18" (45.7 cm) rods
Volts: 120V (Also available for 240V - See Spec Sheet).
Watts: 3000W
Thermostat: Dial Adjustable
Temperature: 150°- 550°F (65°- 288°C)
Insulation: 2" (5.08 cm) Thermal Insulating Wool
Interior Dimensions: 27" (68.58 cm) x 20.5" (52.07 cm) x 40" (101.60 cm)
Net Weight: 300 lbs. (136.08 kg)
Shipping Weight: 317 lbs. (143.80 kg)

Welding Electrodes Price: $2,700.00

Click here to buy from Welding Electrodes

Forney #32264 1/2LB 5/64 6013 WeldRod

1/2 LB, 5/64", 6013 Welding Rod.

Welding Electrodes Price: $7.49

Click here to buy from Welding Electrodes

The 2007-2012 World Outlook for Electrode Holders, Ground Clamps, Cable Connectors, Cables, and Other Circuit Welding Accessories Sold Separately Excluding Electrodes and Stud Welding Equipment

This study covers the world outlook for electrode holders, ground clamps, cable connectors, cables, and other circuit welding accessories sold separately excluding electrodes and stud welding equipment across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-à-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.

Welding Electrodes Price: $795.00

Click here to buy from Welding Electrodes

Weldcraft 2 Thoriated Tungsten Electrode WT040X7

Weldcraft 2% Thoriated Tungsten Electrode WT040X7 Package of 10 - 7 inch 2% thoriated tungsten electrode. Offers good arc starting and is ideal for high current requirements. Also good for low-amperage AC applications using a modified point. Materials Welded Carbon Steel Stainless Steel Nickel Alloy Titanium Copper Free standard ground shipping within contiguous U.S.

Welding Electrodes Price:

Click here to buy from Welding Electrodes

Specification for Carbon Steel Electrodes for Flux Corded Arc Welding : A5.20-95

WHAT IS LATENT DEMAND AND THE P.I.E.?

The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The ?market? is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).

The latent demand for non-ferrous metal arc welding stick electrodes excluding hard-facing electrodes is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market.

For reasons discussed later, this report does not consider the notion of ?unit quantities?, only total latent revenues (i.e., a calculation of price times quantity is never made, though one is impli

Welding Electrodes Price: $16.00

Click here to buy from Welding Electrodes

10 TIG Welding Tungsten Electrodes 1.5% Lanthanated (Gold), 0.040"x7"

The holding ovens are larger and designed to hold electrodes at moderate optimum temperatures to assure dryness. All models are mercury free. The diagonal shelving is designed for maximum capacity and energy efficiency.

* Custom Shelving Available

Electrode Capacity: 1500 lbs. (680.4 kg) 18" (45.7 cm) rods
Volts: 120V (Also available for 240V - See Spec Sheet).
Watts: 3000W
Thermostat: Dial Adjustable
Temperature: 150°- 550°F (65°- 288°C)
Insulation: 2" (5.08 cm) Thermal Insulating Wool
Interior Dimensions: 27" (68.58 cm) x 20.5" (52.07 cm) x 40" (101.60 cm)
Net Weight: 300 lbs. (136.08 kg)
Shipping Weight: 317 lbs. (143.80 kg)

Welding Electrodes Price:

Click here to buy from Welding Electrodes

Hobart 7014 Stick, 5/32-Inch

Hobart 400 Amp Electrode Screw Type Holder 770028

Welding Electrodes Price:

Click here to buy from Welding Electrodes

The 2007-2012 World Outlook for Non-Ferrous Metal Arc Welding Stick Electrodes Excluding Hard-Facing Electrodes

This study covers the world outlook for non-ferrous metal arc welding stick electrodes excluding hard-facing electrodes across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-à-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.

Welding Electrodes Price: $795.00

Click here to buy from Welding Electrodes

Weldcraft Tungsten Gold 1.5% Lanthanated 3/32" X 7"

Weldcraft Tungsten Electrodes   Package of 10 Tungsten Electrodes   MFG # WL332X7   Type:  1.5% Lanthanated Tungsten (EWLa-1.5) Provides excellent arc starting, arc stability and re-ignition, and is less prone to tip wear Size: 3/32" X 7" (2.4 mm X 175 mm)   Applications:  DC   Alloying Element: Lanthanum   Composition:  97.80% Tungsten, 1.30-1.70% Lanthanum, 0.5% Other   Materials welded:  Carbon Steel, Stainless Steel, Nickel Alloy, Titanium    

Welding Electrodes Price:

Click here to buy from Welding Electrodes

Nickel 55 Cast Iron Welding Electrode Repair 3/32" 1 Lb

Nickel 55 Cast Iron welding electrodeMFG: Weldcote MetalsThese are all NEW product and not dead or old stock.Electrode Size: 1/8" X 14" lengthPkg weight: 1 LBStock #: TMNI-5502 Weldcote Metlas Nickel 55 is designed for all-position joining and surfacing of cast iron, malleable iron and ductile iron to itself or dissimilar metals such as mild steel, stainless steel, wrought alloys or high nickel alloys.  A core wire chemistry of approximately 55% nickel and 45% iron produces weld deposits with much lower weld shrinkage stress which in turn reduces the possibility of weld or heat affected zone cracking.  Weldcote Metals Nickel 55 produces high strength, ductile weld deposits even when welding low grade cast iron containing excessive levels of phosphorus or other contaminants.Applications: Especially suited for welding heavy sections such as motor blocks, housings, machine parts, frames, defective castings and building-up worn sections.  Weld deposits are machinable and the deposit color will approximate that of cast iron.Amperage range: 80-120 amps AWS Spec: A5.15/ASME SFA 5.15

Welding Electrodes Price: $23.84

Click here to buy from Welding Electrodes

Firepower Nickel 55 Stick Welding Electrode 1440-0411

Firepower Nickel 55 Stick Welding Electrode 1440-0411 Nickel 55 Welding Electrodes, 1/8" diameter x 14" long For ALL Cast-Iron Welding Applications 1/8" diameter Job Pack includes 3 stick electrodes Free standard ground shipping within contiguous U.S.

Welding Electrodes Price:

Click here to buy from Welding Electrodes

The 2006-2011 World Outlook for Stainless Steel Coiled and Spooled Continuous Solid Wire Electrodes Made from at Least 4-Percent Chromium for Automatic ... Gas Welding Excluding Hard-Facing Electrodes

WHAT IS LATENT DEMAND AND THE P.I.E.?

The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The ?market? is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).

The latent demand for stainless steel coiled and spooled continuous solid wire electrodes made from at least 4-percent chromium for automatic arc and inert gas welding excluding hard-facing electrodes is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market.

For reasons discussed later, this report does not consider the notion of ?unit quantities?, only to

Welding Electrodes Price: $795.00

Click here to buy from Welding Electrodes

5/64" Eazy Strike Rod-7014

For 110 volt welding machines. With Easy Strike igniter tip to help eliminate problems a less experienced welder might encounter while starting the arc. Easy to use, for homeowners, handymen and hobbyists. Can be positioned flat, horizontal, vertical oroverhead. Coated with iron powder titania for AC, DCEP or DCEN welding current. 70 tensile strength.

Welding Electrodes Price: $9.49

Click here to buy from Welding Electrodes

SEPTLS35822063003 - DC Copperclad Pointed Gouging Electrodes

DC Copperclad Pointed Gouging Electrodes

Welding Electrodes Price: $33.62

Click here to buy from Welding Electrodes

Nickel plated electrodes for spot welding aluminum (SAE)

Weldcraft Tungsten Electrodes   Package of 10 Tungsten Electrodes   MFG # WL332X7   Type:  1.5% Lanthanated Tungsten (EWLa-1.5) Provides excellent arc starting, arc stability and re-ignition, and is less prone to tip wear Size: 3/32" X 7" (2.4 mm X 175 mm)   Applications:  DC   Alloying Element: Lanthanum   Composition:  97.80% Tungsten, 1.30-1.70% Lanthanum, 0.5% Other   Materials welded:  Carbon Steel, Stainless Steel, Nickel Alloy, Titanium    

Welding Electrodes Price:

Click here to buy from Welding Electrodes

Hobart 770028 Welding Holder Electrode 400 Amp - Screw Type

Hobart 400 Amp Electrode Screw Type Holder 770028

Welding Electrodes Price:

Click here to buy from Welding Electrodes

Hobart 6011 Stick, 1/8-Inch

Hobart 400 Amp Electrode Screw Type Holder 770028

Welding Electrodes Price:

Click here to buy from Welding Electrodes

US Forge Welding Cast Specialty Electrode Iron 1/8-Inch by 14-Inch 3-Pack #02731

For welding dirty, rusty, scaly cast iron parts. Join cast iron to steel. Problem solver, use when others fail. In easy to open, resealable small packaging for single job use. Use for wood burning stoves, gears, uses, farm tractors, pump housings, exhaust manifolds, cylinder heads, engine blocks or gear housings. 55% nickel content. 75,000 psi tensile strength.

Welding Electrodes Price: $11.55

Click here to buy from Welding Electrodes

Electrode

ESA21373 Features: -Price Is For One Each -Minimum Order Of 1. -ESAB. -UNSPC CODE: 23271707. -Plasma Torch Consumables Plasma Torch Consumables welders accessories torches consumable tip tips cutting electrode electrodes shield cup drag nozzle nozzles shields.-INSUL PT-20AM ELECT.

Welding Electrodes Price:

Click here to buy from Welding Electrodes

Hobart 6013 Stick, 5/32- Inch

Hobart Plasma Tip & Electrode Kit 770496 Kit Consisting of 2 Each - Genuine Hobart plasma tips and plasma electrodes for your HP-25 or HP-50 plasma torch. Suitable for Hobart AirForce 250Ci or AirForce 500i plasma cutters only. Free standard ground shipping within contiguous U.S.

Welding Electrodes Price:

Click here to buy from Welding Electrodes

Standard for Automotive Resistance Spot Welding Electrodes (AWS/SAE Joint Committee Standard)

67-page softcover standard

Welding Electrodes Price:

Click here to buy from Welding Electrodes

International DryRodII Type 5 120/240 Volt Portable Electrode Oven With Digital Thermometer And Wheels

PHX1205520 Features: -Price Is For One Each -Minimum Order Of 1. -Up to 50 lbs / 25 kg of electrodes can be stabilized at once. Wire-wrap heating element provides evenly-distributed, constant heat for 100pct protection of electrodes. Chamber holds one 50lb (25kg) can of electrodes plus additional storage area for loose rods. .-PHOENIX INTERNATIONAL. -UNSPC CODE: 23171500. -Electrode Ovens Electrode Ovens misc. welding equipment electrodes oven rod rods.-ROD OVEN TYPE 5.

Welding Electrodes Price:

Click here to buy from Welding Electrodes

Weldcraft Tungsten Electrodes Red 2 Thoriated 1/16 X 7

Weldcraft Tungsten Electrodes   Package of 10 Tungsten Electrodes   MFG # WT116X7   Type:  2% Thoriated Tungsten (EWTh-2) Offers good arc starting and is ideal for high current requirements.  Also good for low-amperage AC applications using a modified point. Size: 1/16" X 7" (1.6 mm X 175 mm)   Applications:  DC   Alloying Element: Thorium   Composition:  97.3% tungsten   1.70-2.20% Thorium  0.5% Other   Materials welded:  Carbon Steel, Stainless Steel, Nickel Alloy, Titanium, Cooper    

Welding Electrodes Price: $15.70

Click here to buy from Welding Electrodes

Lincoln Electric ED010219 7/32" E6010 Lincoln Fleetweld 5P Carbon Steel Electrode 50 Easy Open Hermetically Sealed Can (Set of 50)

Lincoln Electric ED010219 Features: -Fleetweld® 5P is a great choice for welding on dirty, rusty, greasy or painted steel -- especially in vertical or overhead applications..-LINCOLN FLEETWELD 5P.-Light slag with little slag interference for easy arc control Deep penetration with maximum admixture All-position, particularly good for vertical and overhead.. -UNSPC CODE: 23271810. -Stick Electrode - Carbon Steel Stick Electrode Carbon Steel filler metal metals electrodes (smaw) welding rod rods.-E6010 ELECT FW 5P 7/32 50HS.

Welding Electrodes Price:

Click here to buy from Welding Electrodes

International DryRodII Type 2 120/240 Volt Portable Electrode Oven With Digital Thermometer

PHX1205510 Features: -Price Is For One Each -Minimum Order Of 1. -Up to 20 lbs / 10 kg of electrodes can be stabilized at once. Wire-wrap heating element provides evenly-distributed, constant heat for 100pct protection of electrodes. Rod elevator easily extracts welding rods from oven. .-PHOENIX INTERNATIONAL (OKI). -UNSPC CODE: 23171500. -Electrode Ovens Electrode Ovens misc. welding equipment electrodes oven rod rods.-20B/120 120V AC PORTABLE OVEN.

Welding Electrodes Price:

Click here to buy from Welding Electrodes

The 2006-2011 World Outlook for Non-Ferrous Metal Arc Welding Stick Electrodes Excluding Hard-Facing Electrodes

WHAT IS LATENT DEMAND AND THE P.I.E.?

The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The ?market? is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).

The latent demand for non-ferrous metal arc welding stick electrodes excluding hard-facing electrodes is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market.

For reasons discussed later, this report does not consider the notion of ?unit quantities?, only total latent revenues (i.e., a calculation of price times quantity is never made, though one is impli

Welding Electrodes Price: $795.00

Click here to buy from Welding Electrodes